Results 1 to 15 of 15

Thread: -Novel Rotary-Turbo-InFlow Tech - Gearturbine Project - Atypical Featured Development

  1. #1
    Junior Member Mexico retrodynamix's Avatar
    Join Date
    9th January 2014
    Location
    Monterrey NL Mexico
    Posts
    10
    Thanks
    0
    Thanked 28 Times in 7 Posts

    Lightbulb Novel Rotary-Turbo-InFlow Tech - Gearturbine Project - Featured Development Atypical

    GEARTURBINE PROJECT
    Atypical InFlow Thermodynamic
    Technology Proposal Submission
    Novel Fueled Motor Engine Type



    *State of the art Innovative concept Top system Higher efficient percent.
    Have similar system of the Aeolipile Heron Steam device from Alexandria 10-70 AD. -New Form-Function Motor-Engine Device. Next Step, Epic Design Change, Broken-Seal Revelation. -Desirable Power-Plant Innovation.


    Source: https://www.youtube.com/watch?v=0cPo9Lf44TE


    YouTube; * Atypical New GEARTURBINE / Retrodynamic = DextroRPM VS LevoInFlow + Ying Yang Thrust Way Type - Non Waste Looses

    -This innovative concept consists of hull and core where are held all 8 bteps of the work-flow which make the concept functional. The core has several gears and turbines which are responsible for these 8 steps (5 of them are dedicated to the turbo stages). The first step is fuel compression, followed by 2 cold turbo levels. The fourth step is where the fuel starts burning combustion stage, which creates thrust for the next, 5th step thrust step, which provides power to the planetary gears and turbines and moves the system. This step is followed by two hot turbo steps and the circle is enclosed by the final 8th step bigger turbine. All this motion in a retrodynamic circumstance effect, wich is plus higher RPM speed of self reaction motion, because is like when something go to a something is coming. Its a Rotary-Turbo-InFlow Technique principle.

    *8-X/Y Thermodynamic CYCLE - Way Steps:
    1)1-Compression / bigger
    2)2-Turbo 1 cold
    3)2-Turbo 2 cold
    4)2-Combustion - circular motion flames / opposites
    5)2-Thrust - single turbo & planetary gears / ying yang
    6)2-Turbo 2 hot
    7)2-Turbo 1 hot
    8)1-Turbine / bigger



    -With Retrodynamic Dextrogiro vs Levogiro Phenomenon Effect. / Rotor-RPM VS InFlow / front to front; "Collision-Interaction Type" - inflow vs blades-gear-move. Technical unique dynamic innovative motion mode. [Retrodynamic Reaction = When the inflow have more velocity the rotor have more RPM Acceleration, with high (XY Position) Momentum] Which the internal flow (and rotor) duplicate its speed, when activated being in a rotor (and inflow) with [inverse] opposite Turns. A very strong Novel concept of torque power thrust.

    -Non-waste parasitic looses system for cooling, lubrication & combustion.

    -Shape-Mass + Rotary-Motion = Inertia-Dynamic / Form-Function Wide [Flat] Cylindrical shape + positive dynamic rotary mass = continue Inertia kinetic positive tendency motion. Like a Flywheel.



    -Combustion 2Two continue circular [Rockets] flames. [ying yang] opposite to the other. With 2TWO very long distance INFLOW [inside propulsion] CONDUITS. -4 TURBOS Rotary Total Thrust-Power Regeneration Power System. -Mechanical direct 2two [Small] Planetary Gears at polar position. -Like the Ying Yang Symbol/Concept. -Wide out the Rotor circumference were have much more lever [HIGH Torque] POWER THRUST. -Military benefits; No blade erosion by sand & very low heat target signature profile. -3 points of power thrust; 1-flow way, 2-gear, 3-turbine. *Patent; Dic. 1991 IMPI Mexico #197187 All Rights Reserved. Carlos Barrera.




    iggy:
    Attached Images Attached Images      
    Last edited by retrodynamix, 19th March 2015 at 03:18. Reason: simple, some changes to fix

  2. The Following 6 Users Say Thank You to retrodynamix For This Useful Post:

    Altaira (11th January 2014), Frances (10th January 2014), GCS1103 (11th January 2014), modwiz (12th January 2014), Sooz (11th January 2014)

  3. #2
    lookbeyond
    Guest
    I would like to add an intelligent comment here however i am afraid i do not speak this language!

  4. The Following 3 Users Say Thank You to lookbeyond For This Useful Post:

    Frances (12th January 2014), GCS1103 (11th January 2014), Sooz (11th January 2014)

  5. #3
    Senior Member United States
    Join Date
    13th September 2013
    Posts
    334
    Thanks
    8,192
    Thanked 2,508 Times in 335 Posts
    I'm embarrassed to admit that I have no idea what you are saying. I will therefore turn to my friend, Modwiz, who is an expert in all Gearturbine Projects so that he can explain in detail what you posted. He learned about these Gearturbines while growing up in the Bronx - a city of highly skilled thermodynamic technology.
    Take it away, Modwiz............:interview:

  6. The Following 4 Users Say Thank You to GCS1103 For This Useful Post:

    Frances (12th January 2014), modwiz (12th January 2014), Sooz (11th January 2014)

  7. #4
    Senior Member Australia
    Join Date
    12th September 2013
    Location
    Near Byron Bay Australia
    Posts
    3,232
    Thanks
    14,019
    Thanked 19,400 Times in 3,153 Posts
    Geez Moddy you are a man of many talents! Who'd have thunk it?

    I too have to admit it's another language for me also. Although I think my teenage son may understand it to some degree. I'll wiz it off to him and see what he says.

    Thanks for posting Retro, good to see you here!

    Edit: Oopsy, LB, I thought you meant the English 'mechanical language' in the post above, but having looked at the vid I see you mean the actual language on the vid Yup that would be it, lol....

    (Don't mind me Retro, I make a fool of myself in about 1 of every 10 posts I make on here..... It's my speciality).
    Last edited by Sooz, 11th January 2014 at 11:06.

  8. The Following 4 Users Say Thank You to Sooz For This Useful Post:

    Frances (12th January 2014), GCS1103 (11th January 2014), modwiz (12th January 2014)

  9. #5
    lookbeyond
    Guest
    Hey Sooz i meant all of it!

  10. The Following User Says Thank You to lookbeyond For This Useful Post:

    Frances (12th January 2014)

  11. #6
    Senior Member Morocco modwiz's Avatar
    Join Date
    13th September 2013
    Location
    Nestled in Appalachia
    Posts
    6,132
    Thanks
    37,250
    Thanked 39,052 Times in 6,110 Posts
    Where is the idea that I am an engineer coming from? I haven't had the time to even look at this information. I am in songwriting mode currently.

    I am always looking for stimulating information. I look forward to making some time to look at this.
    "To learn who rules over you simply find out who you are not allowed to criticize" -- Voltaire

    "Great minds discuss ideas; average minds discuss events; small minds discuss people."-- Eleanor Roosevelt

    "Misery loves company. Wisdom has to look for it." -- Anonymous

  12. The Following User Says Thank You to modwiz For This Useful Post:

    Frances (12th January 2014)

  13. #7
    Senior Member United States
    Join Date
    13th September 2013
    Posts
    334
    Thanks
    8,192
    Thanked 2,508 Times in 335 Posts
    Quote Originally posted by modwiz View Post
    Where is the idea that I am an engineer coming from? I haven't had the time to even look at this information. I am in songwriting mode currently.

    I am always looking for stimulating information. I look forward to making some time to look at this.
    You're not in engineering??? (I was joking in my post.)

  14. The Following 3 Users Say Thank You to GCS1103 For This Useful Post:

    Frances (12th January 2014), modwiz (12th January 2014), Sooz (12th January 2014)

  15. #8
    Senior Member Morocco modwiz's Avatar
    Join Date
    13th September 2013
    Location
    Nestled in Appalachia
    Posts
    6,132
    Thanks
    37,250
    Thanked 39,052 Times in 6,110 Posts
    Quote Originally posted by GCS1103 View Post
    You're not in engineering??? (I was joking in my post.)
    I knew you were. I was just getting ahead of possible damage control.
    "To learn who rules over you simply find out who you are not allowed to criticize" -- Voltaire

    "Great minds discuss ideas; average minds discuss events; small minds discuss people."-- Eleanor Roosevelt

    "Misery loves company. Wisdom has to look for it." -- Anonymous

  16. The Following 3 Users Say Thank You to modwiz For This Useful Post:

    Frances (12th January 2014), GCS1103 (12th January 2014), Sooz (12th January 2014)

  17. #9
    Senior Member Australia
    Join Date
    12th September 2013
    Location
    Near Byron Bay Australia
    Posts
    3,232
    Thanks
    14,019
    Thanked 19,400 Times in 3,153 Posts
    Lol, I knew GCS was playing naughty.

    I was just as intrigued as how you Mr Wiz would respond.

  18. The Following 3 Users Say Thank You to Sooz For This Useful Post:

    Frances (12th January 2014), GCS1103 (12th January 2014), modwiz (12th January 2014)

  19. #10
    Retired Member
    Join Date
    13th September 2013
    Posts
    1,361
    Thanks
    9,887
    Thanked 6,672 Times in 1,292 Posts
    So you have combustion induced by two turbos then another bigger that that fuels the the fly wheel with the torque.Also helped by the idea of the cold turbines that help feed the gears .Hence giving more rpm for the same fuel source hence cheaper to run.

    Is this more or less correct retro?

  20. The Following 2 Users Say Thank You to Tonz For This Useful Post:

    Church (12th January 2014), Frances (12th January 2014)

  21. #11
    Junior Member Mexico retrodynamix's Avatar
    Join Date
    9th January 2014
    Location
    Monterrey NL Mexico
    Posts
    10
    Thanks
    0
    Thanked 28 Times in 7 Posts
    demage control, what modwiz
    Last edited by retrodynamix, 12th January 2014 at 20:26. Reason: to fix some

  22. #12
    Junior Member Mexico retrodynamix's Avatar
    Join Date
    9th January 2014
    Location
    Monterrey NL Mexico
    Posts
    10
    Thanks
    0
    Thanked 28 Times in 7 Posts
    tonton, I have 1 rotor, with 2 /inside/ inflow conduits /simetric/, were I have 4 pairs of turbos, and 2 singles with a gear /than moves planetary/. The bigger, is at the principio of the cycle, and and at the end to /you can see at the 8 steps cycle/. the fuel comes from the inside bar/tube, and keep going by the centrifugal force of the rotary move. And I say flywheel, because the form-function of the rotor cut be similar by work. And the strong torque, its because the small gear/with the single turbo/ moves inside and planetary, at one much more bigger, inside the shell. You can see that by you self.
    Thanks, very much, for the time and the interes, of my concept.
    Very Kind.
    Regards.
    Last edited by retrodynamix, 12th January 2014 at 20:27. Reason: fix some

  23. #13
    Junior Member Mexico retrodynamix's Avatar
    Join Date
    9th January 2014
    Location
    Monterrey NL Mexico
    Posts
    10
    Thanks
    0
    Thanked 28 Times in 7 Posts
    tonton, and what you say about of giving more rpm for the same fuel source hence cheaper to run. is the Retrodynamic effect, were the system is than you have the reaction in at from of the action, its like that.
    Thanks.

  24. #14
    Junior Member Mexico retrodynamix's Avatar
    Join Date
    9th January 2014
    Location
    Monterrey NL Mexico
    Posts
    10
    Thanks
    0
    Thanked 28 Times in 7 Posts

    Lightbulb



    State of the Art Novel / 1; Rotary-Turbo-InFlow Tech / Featured Development - GEARTURBINE PROJECT Have the similar basic system of the Aeolipilie Heron Steam Turbine device from Alexandria 10-70 AD * With Retrodynamic = DextroRPM VS LevoInFlow + Ying Yang Way Power Type - Non Waste Looses *8X/Y Thermodynamic CYCLE Way Steps. Higher efficient percent. No blade erosion by sand & very low heat target signature Pat:197187IMPI MX Dic1991 Atypical Motor Engine Type


    GEARTURBINE IIMAGENS GALLERY AT BEHANCE:

    https://www.behance.net/gearturbina61a






    Retrodynamic Dextrogiro vs Levogiro Phenomenon Effect. / Rotor-RPM VS InFlow / front to front; "Collision-Interaction Type" - inflow vs blades-gear-move. Technical unique dynamic innovative motion mode. [Retrodynamic Reaction = When the inflow have more velocity the rotor have more RPM Acceleration, with high (XY Position) Momentum] Which the internal flow (and rotor) duplicate its speed, when activated being in a rotor (and inflow) with [inverse] opposite Turns. The Reaction at front of the action. A very strong Novel torque power concept.










    Last edited by retrodynamix, 19th March 2015 at 02:49. Reason: TO POST COMPLEMENTARY INFORMATION
    State of the Art-Novel InFlow Tech Project Development; ·1-Gearturbine RotaryTurbo Retrodynamic = Dextro RPM VS Levo InFlow + Ying Yang Way Power Type-Non Waste Looses Similar System of Aeolipile 10-70 AD Pat197187IMPI MX Dic1991 / ·2-Imploturbocompressor One MovingPart System Excellence Design One Compression Step Similar to a Hurricane Satellite view, is the same implo inflow way nature InFlow Goes from MacroFlow to MicroFlow

  25. The Following User Says Thank You to retrodynamix For This Useful Post:

    sandy (19th March 2015)

  26. #15
    Junior Member Mexico retrodynamix's Avatar
    Join Date
    9th January 2014
    Location
    Monterrey NL Mexico
    Posts
    10
    Thanks
    0
    Thanked 28 Times in 7 Posts
    *State of the Art - Novel InFlow Tech - Featured Project Development;
    1-Gearturbine, 2-Imploturbocompressor:

    *Wordpress Blog State of the Art Novel InFlow Gearturbine Imploturbocompressor:

    http://stateoftheartnovelinflowtech.blogspot.mx/

    *1-GEARTURBINE PROJECT, Rotary-Turbo-InFlow Tech, Atypical InFlow Thermodynamic, Technology Proposal Submission, Novel Fueled Motor Engine Type:

    *1-GEARTURBINE BEHANCE Images Gallery Portafolio:

    https://www.behance.net/gallery/2101...urbine-Project

    ·State of the art Innovative concept Top system Higher efficient percent.*Power by bar, for Air-Planes, Sea-Boats, Land-Transport & Dynamic Power-Plant Generation.
    -Have similar system of the Aeolipile Heron Steam device from Alexandria 10-70 AD. -New Form-Function Motor-Engine Device. Next Step, Epic Design Change, Broken-Seal Revelation. -Desirable Power-Plant Innovation.

    -YouTube; * Atypical New • GEARTURBINE / Retrodynamic = DextroRPM VS LevoInFlow + Ying Yang Thrust Way Type - Non Waste Looses

    https://www.youtube.com/watch?v=0cPo9Lf44TE

    The present invention relates to a compression and pushing motor characterized in that it is composed of a housing, said housing accommodates a rotor rotating in its internal space supported by a pair of gears whose passage coincides with the inner surface of the rotor; A rotor (or core) that internally has flow ducts presented one in reverse of another, balanced these, begin at the point where they end; Has several cavity points for reaction turbines, as well as two combustion chambers isolated by means of a system of nozzles and presented in the manner of poles, that is on opposite sides of one another, but their flow with the same circular direction of the rotor when It rotates; The rotor also has several fluid conduits radially presented; A hollow power transmission rod arranged and traversing in the center of the rotor, which in its interior flows the lubricant and fuel with movement of the ends towards the center, at this point by means of the centrifugal force of the rotor reaches the required parts; In the bar is arranged an air intake fan which by rotating the rotor suction air and introduces it to the internal ducts of the rotor with an initial compression, next to this fan is a current collector that generates the necessary electricity and Together with a coil, activates the current necessary for combustion; A center of the nucleus in which the formation of the internal ducts of the rotor begins and ends (in and out); Said center of the core has arranged a pair of semi-cylindrical cavities housing two pairs of turbochargers said core of the core is diagonally traversed by fluid conduits exiting from the bar to the combustion bed and lubrication points and by the centrifugal force of the rotation Of the rotor sends the fluids to the required points due to their radial direction; Exhaust blades are the point of exit of the exhaust gases that leave the internal ducts of the rotor and contrareaccionan with the fixed blade in the last point of use of propulsion of the motor; Two combustion chambers contained in the rotor's strong ducts when the parts forming it are joined, said chambers have their flame in front of the thrust blade, which is connected by a common shaft to a gear located on the outside of the rotor and Coincides with the internal gear of the housing; A starter motor which by means of a gear engages the starter gear attached to the bar.

    -This innovative concept consists of hull and core where are held all 8 Steps of the work-flow which make the concept functional. The core has several gears and turbines which are responsible for these 8 steps (5 of them are dedicated to the turbo stages). The first step is fuel compression, followed by 2 cold turbo levels. The fourth step is where the fuel starts burning – combustion stage, which creates thrust for the next, 5th step – thrust step, which provides power to the planetary gears and turbines and moves the system. This step is followed by two hot turbo steps and the circle is enclosed by the final 8th step – bigger turbine. All this motion in a retrodynamic circumstance effect, wich is plus higher RPM speed by self motion. The Reaction at front of the action.

    ·8-X/Y Thermodynamic CYCLE - Way Steps:
    1)1-Compression / bigger
    2)2-Turbo 1 cold
    3)2-Turbo 2 cold
    4)2-Combustion - circular motion flames / opposites
    5)2-Thrust - single turbo & planetary gears / ying yang
    6)2-Turbo 2 hot
    7)2-Turbo 1 hot
    8)1-Turbine / bigger

    -With Retrodynamic Dextrogiro vs Levogiro Phenomenon Effect. / Rotor-RPM VS InFlow / front to front; "Collision-Interaction Type" - inflow vs blades-gear-move. Technical unique dynamic innovative motion mode. [Retrodynamic Reaction = When the inflow have more velocity the rotor have more RPM Acceleration, with high (XY Position) Momentum] Which the internal flow (and rotor) duplicate its speed, when activated being in a rotor (and inflow) with [inverse] opposite Turns. The Reaction at front of the action. A very strong Novel torque power concept.

    -Non waste parasitic looses for; friction, cooling, lubrication & combustion.

    -Shape-Mass + Rotary-Motion = Inertia-Dynamic / Form-Function Wide [Flat] Cylindrical shape + positive dynamic rotary mass = continue Inertia positive tendency motion. Kinetic Rotating Mass. Tendency of matter to continue to move. Like a Free-Wheel.

    -Combustion 2Two continue circular [Rockets] flames. [ying yang] opposite one to the other. – With 2TWO very long distance INFLOW [inside propulsion] CONDUITS. -4 TURBOS Rotary Total Thrust-Power Regeneration Power System. -Mechanical direct 2two [Small] Planetary Gears at polar position. -Like the Ying Yang Symbol/Concept.

    -The Mechanical Gear Power Thrust Point Wide out the Rotor circumference were have much more lever [HIGH Torque] POWER THRUST. -No blade erosion by sand & very low heat target signature profile. -3 points of power thrust; 1-flow way, 2-gear, 3-turbine. *Patent; Dic. 1991 IMPI Mexico #197187 All Rights Reserved. Carlos Barrera.


    ·2-IMPLOTURBOCOMPRESSOR; One Moving Part System Excellence Design - The InFlow Interaction comes from Macro-Flow and goes to Micro-Flow by Implossion - Only One Compression Step; Inflow, Compression and outflow at one simple circular dynamic motion Concept.

    *2-IMPLOTURBOCOMPRESSOR BEHANCE Images Gallery Portafolio:

    https://www.behance.net/gallery/21691891/Imploturbocompressor

    *·“Excellence in Design" because is only one moving part. Only one unique compression step. Inflow and out flow at the same one system, This invention by its nature a logic and simple conception in the dynamics flow mechanics area. The invention is a wing made of one piece in a rotating motion, contained in a pair cavity system connected by implocavity, and interacting dynamically with a flow, that passes internally "Imploded" through its simple mechanism. This flow can be gas (air) or liquid (water). And have two different applications, in two different form-function; this one can be received (using the dynamic flow passage, as a receiver). Or it can be generated (with a power plant, generating a propulsion).

    An example cut be, as a Bike needs a chain to work from motor to wheel. And for the Imploturbocompressor application, cut be as; in a circumstance at the engine, as an A-activate flow, and with a a tube flow conduit going to the wheel as a B-receiving-flow the work use.

    To see a Imploturbocompressor animation, is posible on a simple way, just to check the Hurricane Satellite view, and is the same implo inflow way nature.

    And when the flow that is received and that is intended to be used at best, must no necessarily by a exhausting or rejection gas, but must be a dynamic passing gas or liquid flow with the only intention to count it or to measure it. This could be possible at the passing and interacting period when it passes inside its simple mechanism. This can be in any point of the work flow trajectory.
    In case the flow that is received is a water falling by gravity, the Imploturbocompressor can profit an be obtained by generating? electricity such as obtained by the pelton well, like I say before. The "Imploturbocompressor", is a good option to pump water, or a gas flow, and all kinds of pipes lines dynamic moves.

    Or only receive the air-liquid flow, in order to measure its passage with a counter placed on the bar, because when this flow passes through the simple mechanism of a rotating wing made of only one piece it interacts within the implocavities system. And this flow can be air wind, with the difference of can have an horizontal work position, and that particle technical circumstances make an easy way for urban building work new use application, and have wind flow from all the sides 180 grades view. The aforementioned information about this invention refers to technical applications, such as a dynamic flow receiver. (whether being gas or liquid).

    With the appropriate power plant and the appropriate dimensioning and number of RPM this invention is also feasible to generate an atmospheric air propulsion and the auto-propulsion of an aircraft. Being an effective and very simple system that implodes and compresses the atmospheric air permits the creation of a new concept of propulsion for aircrafts, due to its simple mechanism and innovative nature. At the place of the aircraft were the system appears and the manner how the propulsion direction can be oriented with a vectorial flow (no lobster tail) with I call "yo-yo system" (middle cut (at the shell) to move, one side loose), guided and balanced is feasible to create a new concept of TOVL-vertical take-off landing, Because the exhaust propulsion can going out radial in all the 360 vectorial positions, going out direct all the time in all the vectors direction. With his rotor cover for an better furtive fly, like going down of a bridge for example. Likewise, with the due form and dimensioning, and considering the liquid density and the due revolutions for this element there could be generated a propulsion (water) in order to move an aquatic ship, whether on surface or under water. Also can be a good option to pump liquid combustion for a rocket propulsion.

    Making a metaphoric comparison with the intention to expose it more clearly for a better comprehension of this innovative technical detail, it would be similar to the trajectory and motion of a dynamic flow compared with a rope (extended) that passes through the system would have now a knot (without obstructing the flow), so the complete way of the flow at the imploturbocompresor system have three direct ways and between make two different turns; direct way (entrance) - turn - direct way (implocavity) - turn - direct way (exit), all this in a 1 simple circular move system concept.

    Its prudent to mention that the curves and the inclinations of the blades of a rotating wing made of this invention, is conferred by its shape and function a structural rigidity allowing it to conduct and alter appropriately the dynamic flow passing through its system.

    +PLUS; *State of the Art, Novel Technology, Featured Project Development / Space, Satellite and Habitat, Power-Plant, Generator, Self-Feed Unit; H2O=>HHO=>H2O=>HHO=>Etc... *4 Systems All in One Unit, One By One, Plus Four-4 Projects added One to Other; *·1-Gearturbine, ·2-Imploturbocompressor, ·3-Dynamic Generator, ·4-Electrolysis System:

    ·1-GEARTURBINE; Rotary-Turbo-InFlow Tech,Have the similar basic system of the Aeolipilie Heron Steam Turbine device from Alexandria 10-70 AD * With Retrodynamic = DextroRPM VS LevoInFlow + Ying Yang Way Power Type - Non Waste Looses *8X/Y Thermodynamic CYCLE Way Steps. 4 Turbos, Higher efficient percent. No blade erosion by sand & very low heat target signature Pat:197187IMPI MX Dic1991 Atypical Motor Engine Type.

    ·2-IMPLOTURBOCOMPRESSOR; One Moving Part System Excellence Design - The InFlow Interaction comes from Macro-Flow and goes to Micro-Flow by Implossion - Only One Compression Step; Inflow, Compression and outflow at one simple circular dynamic motion / New Concept. To see a Imploturbocompressor animation, is possible on a simple way, just to check an Hurricane Satellite view, and is the same implo inflow way nature.

    ·Note;Plus-this-Two Projects to complete all the System Work/Self-Feed Unit Space Power-Plant-H2O=>HHO.
    ·3-Dynamic Generator/New Kind.
    ·4-Electrolysis System/BioDesign.
    *(3&4-Hide-Cards-on-the-Hand).

    *State of the Art - Novel InFlow Tech - Featured Project Development;
    1-Gearturbine, 2-Imploturbocompressor:

    *Wordpress Blog State of the Art Novel InFlow Gearturbine Imploturbocompressor:

    http://stateoftheartnovelinflowtech.blogspot.mx/

    *1-GEARTURBINE PROJECT, Rotary-Turbo-InFlow Tech, Atypical InFlow Thermodynamic, Technology Proposal Submission, Novel Fueled Motor Engine Type:

    *1-GEARTURBINE BEHANCE Images Gallery Portafolio:

    https://www.behance.net/gallery/2101...urbine-Project

    ·State of the art Innovative concept Top system Higher efficient percent.*Power by bar, for Air-Planes, Sea-Boats, Land-Transport & Dynamic Power-Plant Generation.
    -Have similar system of the Aeolipile Heron Steam device from Alexandria 10-70 AD. -New Form-Function Motor-Engine Device. Next Step, Epic Design Change, Broken-Seal Revelation. -Desirable Power-Plant Innovation.

    -YouTube; * Atypical New • GEARTURBINE / Retrodynamic = DextroRPM VS LevoInFlow + Ying Yang Thrust Way Type - Non Waste Looses

    https://www.youtube.com/watch?v=0cPo9Lf44TE

    The present invention relates to a compression and pushing motor characterized in that it is composed of a housing, said housing accommodates a rotor rotating in its internal space supported by a pair of gears whose passage coincides with the inner surface of the rotor; A rotor (or core) that internally has flow ducts presented one in reverse of another, balanced these, begin at the point where they end; Has several cavity points for reaction turbines, as well as two combustion chambers isolated by means of a system of nozzles and presented in the manner of poles, that is on opposite sides of one another, but their flow with the same circular direction of the rotor when It rotates; The rotor also has several fluid conduits radially presented; A hollow power transmission rod arranged and traversing in the center of the rotor, which in its interior flows the lubricant and fuel with movement of the ends towards the center, at this point by means of the centrifugal force of the rotor reaches the required parts; In the bar is arranged an air intake fan which by rotating the rotor suction air and introduces it to the internal ducts of the rotor with an initial compression, next to this fan is a current collector that generates the necessary electricity and Together with a coil, activates the current necessary for combustion; A center of the nucleus in which the formation of the internal ducts of the rotor begins and ends (in and out); Said center of the core has arranged a pair of semi-cylindrical cavities housing two pairs of turbochargers said core of the core is diagonally traversed by fluid conduits exiting from the bar to the combustion bed and lubrication points and by the centrifugal force of the rotation Of the rotor sends the fluids to the required points due to their radial direction; Exhaust blades are the point of exit of the exhaust gases that leave the internal ducts of the rotor and contrareaccionan with the fixed blade in the last point of use of propulsion of the motor; Two combustion chambers contained in the rotor's strong ducts when the parts forming it are joined, said chambers have their flame in front of the thrust blade, which is connected by a common shaft to a gear located on the outside of the rotor and Coincides with the internal gear of the housing; A starter motor which by means of a gear engages the starter gear attached to the bar.

    -This innovative concept consists of hull and core where are held all 8 Steps of the work-flow which make the concept functional. The core has several gears and turbines which are responsible for these 8 steps (5 of them are dedicated to the turbo stages). The first step is fuel compression, followed by 2 cold turbo levels. The fourth step is where the fuel starts burning – combustion stage, which creates thrust for the next, 5th step – thrust step, which provides power to the planetary gears and turbines and moves the system. This step is followed by two hot turbo steps and the circle is enclosed by the final 8th step – bigger turbine. All this motion in a retrodynamic circumstance effect, wich is plus higher RPM speed by self motion. The Reaction at front of the action.

    ·8-X/Y Thermodynamic CYCLE - Way Steps:
    1)1-Compression / bigger
    2)2-Turbo 1 cold
    3)2-Turbo 2 cold
    4)2-Combustion - circular motion flames / opposites
    5)2-Thrust - single turbo & planetary gears / ying yang
    6)2-Turbo 2 hot
    7)2-Turbo 1 hot
    8)1-Turbine / bigger

    -With Retrodynamic Dextrogiro vs Levogiro Phenomenon Effect. / Rotor-RPM VS InFlow / front to front; "Collision-Interaction Type" - inflow vs blades-gear-move. Technical unique dynamic innovative motion mode. [Retrodynamic Reaction = When the inflow have more velocity the rotor have more RPM Acceleration, with high (XY Position) Momentum] Which the internal flow (and rotor) duplicate its speed, when activated being in a rotor (and inflow) with [inverse] opposite Turns. The Reaction at front of the action. A very strong Novel torque power concept.

    -Non waste parasitic looses for; friction, cooling, lubrication & combustion.

    -Shape-Mass + Rotary-Motion = Inertia-Dynamic / Form-Function Wide [Flat] Cylindrical shape + positive dynamic rotary mass = continue Inertia positive tendency motion. Kinetic Rotating Mass. Tendency of matter to continue to move. Like a Free-Wheel.

    -Combustion 2Two continue circular [Rockets] flames. [ying yang] opposite one to the other. – With 2TWO very long distance INFLOW [inside propulsion] CONDUITS. -4 TURBOS Rotary Total Thrust-Power Regeneration Power System. -Mechanical direct 2two [Small] Planetary Gears at polar position. -Like the Ying Yang Symbol/Concept.

    -The Mechanical Gear Power Thrust Point Wide out the Rotor circumference were have much more lever [HIGH Torque] POWER THRUST. -No blade erosion by sand & very low heat target signature profile. -3 points of power thrust; 1-flow way, 2-gear, 3-turbine. *Patent; Dic. 1991 IMPI Mexico #197187 All Rights Reserved. Carlos Barrera.


    ·2-IMPLOTURBOCOMPRESSOR; One Moving Part System Excellence Design - The InFlow Interaction comes from Macro-Flow and goes to Micro-Flow by Implossion - Only One Compression Step; Inflow, Compression and outflow at one simple circular dynamic motion Concept.

    *2-IMPLOTURBOCOMPRESSOR BEHANCE Images Gallery Portafolio:

    https://www.behance.net/gallery/21691891/Imploturbocompressor

    *·“Excellence in Design" because is only one moving part. Only one unique compression step. Inflow and out flow at the same one system, This invention by its nature a logic and simple conception in the dynamics flow mechanics area. The invention is a wing made of one piece in a rotating motion, contained in a pair cavity system connected by implocavity, and interacting dynamically with a flow, that passes internally "Imploded" through its simple mechanism. This flow can be gas (air) or liquid (water). And have two different applications, in two different form-function; this one can be received (using the dynamic flow passage, as a receiver). Or it can be generated (with a power plant, generating a propulsion).

    An example cut be, as a Bike needs a chain to work from motor to wheel. And for the Imploturbocompressor application, cut be as; in a circumstance at the engine, as an A-activate flow, and with a a tube flow conduit going to the wheel as a B-receiving-flow the work use.

    To see a Imploturbocompressor animation, is posible on a simple way, just to check the Hurricane Satellite view, and is the same implo inflow way nature.

    And when the flow that is received and that is intended to be used at best, must no necessarily by a exhausting or rejection gas, but must be a dynamic passing gas or liquid flow with the only intention to count it or to measure it. This could be possible at the passing and interacting period when it passes inside its simple mechanism. This can be in any point of the work flow trajectory.
    In case the flow that is received is a water falling by gravity, the Imploturbocompressor can profit an be obtained by generating? electricity such as obtained by the pelton well, like I say before. The "Imploturbocompressor", is a good option to pump water, or a gas flow, and all kinds of pipes lines dynamic moves.

    Or only receive the air-liquid flow, in order to measure its passage with a counter placed on the bar, because when this flow passes through the simple mechanism of a rotating wing made of only one piece it interacts within the implocavities system. And this flow can be air wind, with the difference of can have an horizontal work position, and that particle technical circumstances make an easy way for urban building work new use application, and have wind flow from all the sides 180 grades view. The aforementioned information about this invention refers to technical applications, such as a dynamic flow receiver. (whether being gas or liquid).

    With the appropriate power plant and the appropriate dimensioning and number of RPM this invention is also feasible to generate an atmospheric air propulsion and the auto-propulsion of an aircraft. Being an effective and very simple system that implodes and compresses the atmospheric air permits the creation of a new concept of propulsion for aircrafts, due to its simple mechanism and innovative nature. At the place of the aircraft were the system appears and the manner how the propulsion direction can be oriented with a vectorial flow (no lobster tail) with I call "yo-yo system" (middle cut (at the shell) to move, one side loose), guided and balanced is feasible to create a new concept of TOVL-vertical take-off landing, Because the exhaust propulsion can going out radial in all the 360 vectorial positions, going out direct all the time in all the vectors direction. With his rotor cover for an better furtive fly, like going down of a bridge for example. Likewise, with the due form and dimensioning, and considering the liquid density and the due revolutions for this element there could be generated a propulsion (water) in order to move an aquatic ship, whether on surface or under water. Also can be a good option to pump liquid combustion for a rocket propulsion.

    Making a metaphoric comparison with the intention to expose it more clearly for a better comprehension of this innovative technical detail, it would be similar to the trajectory and motion of a dynamic flow compared with a rope (extended) that passes through the system would have now a knot (without obstructing the flow), so the complete way of the flow at the imploturbocompresor system have three direct ways and between make two different turns; direct way (entrance) - turn - direct way (implocavity) - turn - direct way (exit), all this in a 1 simple circular move system concept.

    Its prudent to mention that the curves and the inclinations of the blades of a rotating wing made of this invention, is conferred by its shape and function a structural rigidity allowing it to conduct and alter appropriately the dynamic flow passing through its system.

    +PLUS; *State of the Art, Novel Technology, Featured Project Development / Space, Satellite and Habitat, Power-Plant, Generator, Self-Feed Unit; H2O=>HHO=>H2O=>HHO=>Etc... *4 Systems All in One Unit, One By One, Plus Four-4 Projects added One to Other; *·1-Gearturbine, ·2-Imploturbocompressor, ·3-Dynamic Generator, ·4-Electrolysis System:

    ·1-GEARTURBINE; Rotary-Turbo-InFlow Tech,Have the similar basic system of the Aeolipilie Heron Steam Turbine device from Alexandria 10-70 AD * With Retrodynamic = DextroRPM VS LevoInFlow + Ying Yang Way Power Type - Non Waste Looses *8X/Y Thermodynamic CYCLE Way Steps. 4 Turbos, Higher efficient percent. No blade erosion by sand & very low heat target signature Pat:197187IMPI MX Dic1991 Atypical Motor Engine Type.

    ·2-IMPLOTURBOCOMPRESSOR; One Moving Part System Excellence Design - The InFlow Interaction comes from Macro-Flow and goes to Micro-Flow by Implossion - Only One Compression Step; Inflow, Compression and outflow at one simple circular dynamic motion / New Concept. To see a Imploturbocompressor animation, is possible on a simple way, just to check an Hurricane Satellite view, and is the same implo inflow way nature.

    ·Note;Plus-this-Two Projects to complete all the System Work/Self-Feed Unit Space Power-Plant-H2O=>HHO.
    ·3-Dynamic Generator/New Kind.
    ·4-Electrolysis System/BioDesign.
    *(3&4-Hide-Cards-on-the-Hand).
    State of the Art-Novel InFlow Tech Project Development; ·1-Gearturbine RotaryTurbo Retrodynamic = Dextro RPM VS Levo InFlow + Ying Yang Way Power Type-Non Waste Looses Similar System of Aeolipile 10-70 AD Pat197187IMPI MX Dic1991 / ·2-Imploturbocompressor One MovingPart System Excellence Design One Compression Step Similar to a Hurricane Satellite view, is the same implo inflow way nature InFlow Goes from MacroFlow to MicroFlow

  27. The Following User Says Thank You to retrodynamix For This Useful Post:

    Elen (6th February 2017)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •