PDA

View Full Version : Make your own coil lanyards



The One
16th February 2021, 20:19
From the survivalist.

OK.....so I had some time on my hands and decided to try my hand at making coil lanyards, dummy cords or second lieutenant-assist cords (my favorite:D:) out of materials I had around the house. I did some research on the net and saw similar methods using some heavy duty 300lb. test line....so here's what I came up with.

Here's what I used to make these:

1. Pot to boil water.
2. Large boil of cold water with ice.
3. Some 1/4 dowels.
4. Paracord.
5. Weedeater line (I used the 0.08" size).

STEP 1.

Cut your dowels about 6-8 inches, depending on how long you want your cords.Drill some small holes on each end.

https://www.survivalistboards.com/d3/attachments/37/37150-28904ea577a5bd2892a5526a73b078a1.jpg

STEP 2.

Cut about 30" of both paracord and weedeater line.
"Gut" your paracord and slip it over the weedeater line.

https://www.survivalistboards.com/d3/attachments/37/37151-d6860c8d75a56feb0e0c24f0508c4a02.jpg

STEP 3.
Slip one end of the weedeater line into the dowel and begin wrapping the cord around the dowel.....slipping it tightly against each coil.

Once complete, slip the remaining end into the other hole you drilled.

https://www.survivalistboards.com/d3/attachments/37/37152-4b9977c8e7eb189b1899c20ed9d93e54.jpg

STEP 4.

Bring a pot of water to a rolling boil.
Drop the dowels into the boiling water for at least 5 minutes.
Be careful........the paracord may melt if it stays at the bottom or side of the pot.

STEP 5.

Using tongs or pliers....take the dowels out of the pot and immediately immerse it into the bowl of ice water.
Slip it off the dowel and let air dry.


https://www.survivalistboards.com/d3/attachments/37/37153-be5d039aea336f7bbdeee765729c6ba4.jpg

https://www.survivalistboards.com/d3/attachments/37/37155-ca7ac6e9e4a858ce7da424dd5139137b.jpg

STEP 6.

Here's where you can customize it to fit your needs. I simply 'spliced and whipped' some ends of paracord onto the ends using the 'gutted' strands of paracord making some loops.

https://www.survivalistboards.com/d3/attachments/37/37154-aace44c23ad51c1a84033349fb8ed9d0.jpg

You can use snap links or maybe some snap hooks whatever you want. You may want to dress it up some more and get some of those wire heat shrink tubes...it's up to you.

Use these for game calls, flashlights, knives.....you name it.

Still have to put it thru it's paces and perfect it....but I thought I'd share the wealth.

Good luck!